Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
| DESCRIPTION | A two pack high build clear coat . Good resistance to UV and moisture. |
| RECOMMANDED USE | For application on Steel surface, stone surface etc. for decorative and protective purpose. It should be applied on any suitable base coat. |
| TYPE | Two pack |
| MIXING RATIO | Base : Catalyst : 2 : 1 by volume. |
| MATURATION TIME | 20 Minutes |
| POT LIFE OF MIXTURE | 5-6 hrs. |
| FINISH | Glossy, Semi Glossy and Matt. |
| COLOUR | Transparent |
| COVERING CAPACITY(THEORATICALLY) | 10 - 11 Sq.Mt/Ltr. |
| RECOMMENDED DFT | 50 - 60 microns per coat |
| VOLUME SOLIDS % | APPROX 45 % |
| DRYING TIME | Touch – 1 hr. Hard – Overnight |
| OVER COATING INTERVAL | Min. Overnight |
| FLASH POINT | Above 25C |
| RECOMMENDED THINNER | No Thinner should be added |
| METHOD OF APPLICATION | Brush and Spray |
| DIRECTION FOR USE | Surface should be clean, free from dust, oil, moisture and lose particles. Stir the contents before use. Mix base and hardener properly in the recommend ratio. Allow mixture to mature for 20 minutes before applying by brush or spray. |
Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
