DELITE (Synthetic Enamel)

DELITE SYNTHIC ENAMEL PAINTS
(WHITE & ALL SHADE)

Specification
DESCRIPTION A premioum quality glossy enamel based on syn.resin vehicle & stable weather resitant pigments,designed for both protection & decoration ,intermally & externally.This is an ideal finishinng paints for new & old work on wood,metal ,brick,cement,plasted concreat,fiberboard etc.
RECOMMANDED USE As a finishing coat for exterior of wooden or steel surfaces exposed in mild to moderate corrosive environment..
TYPE Singel Pack Air Drying
FINISH Glossy / semi glossy/ matt
COLOUR Any assorted shade
COVERING CAPACITY
(THEORATICALLY)
05-06 Sq. Mt./ Ltr. per coat at 35 micron DFT
RECOMMENDED DFT 25 - 30 Microns per coat
VOLUME SOLIDS Approx. 22%
DRYING TIME Touch : 1 HOURS, Handle : 8-10 hrs. Hard : Overnight
OVER COATING INTERVAL Min. 8 hours. Max – indefinite
FLASH POINT Above 200C
RECOMMENDED THINNER G p thinner
METHOD OF APPLICATION Brush, roller, or airless Spray
DIRECTION FOR USE Surface should be clean, for free rust, grease, oil, moisture
and lose flakes. Sand blast mild steel substrate. Stir the contents before use.  All Use if necessary recommended thinner. Primer surface should not be exposed to corrosive environment for a long time without application of finishing paints.

Quick Inquiry