Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
DESCRIPTION | This is an aromatic Interior coating provide a durable finish for chemical environment. It gives good abrasion resistance |
RECOMMANDED USE | Chemicals & Fertilizer Industries, Petrochemical Complexes, Refineries, (Interior). Interior Maintenance Coating, Mild Steel, Stainless Steel, GI, Aluminium, Plastics, ABS, FRP, Wood, Acrylics, Polystyrene Polycarbonates, Cement, Concrete, etc. Hygienic Wall Coating. Original Equipment Coating. |
TYPE | Two pack, cured with aromatic poly isocyanate |
MIXING RATIO | 3 : 1 ( Base: Hardener) By volume |
MATURATION TIME | 30 Minutes |
POT LIFE OF MIXTURE | 2 – 3 hrs |
FINISH | Glossy / semi glossy/ matt |
COLOUR | Any assorted shade |
COVERING CAPACITY | 10 – 12 Sq. Mt./ Ltr. per coat at 35 micron DFT |
RECOMMENDED DFT | 30 - 35 Microns per coat |
VOLUME SOLIDS % | Approx. 45% |
DRYING TIME | Touch : 1 hr, Handle : 6-8 hrs., Hard : Overnight |
OVER COATING INTERVAL | Min. Overnight. Max - 6 days |
FLASH POINT | Above 25C |
RECOMMENDED THINNER | Polyurethane Thinner |
METHOD OF APPLICATION | Brush, roller, Conventional or airless Spray |
DIRECTION FOR USE | Surface should be clean, for free rust, grease, oil, moisture and loose flakes. Sand blast mild steel substrate. Stir the contents before use. Mix base and hardener properly in the recommended ratio. Allow mixture to mature for 20 minutes before applying by brush or spray. Use if necessary recommended thinner. Primer surface should not be exposed to corrosive environment for a long time without application of finishing paints. |