Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
DESCRIPTION | A single pack high performance heat resistant acrylic clear based on silicon resin medium for chemical resistant & steel surface operating 400°c dry heat. |
RECOMMANDED USE | Pipe works & similar surfaces exposed to dry heat attack. |
TYPE | Single pack |
FINISH | clear |
COLOUR | w/w |
COVERING CAPACITY | 19.6-15.5sq.Mt/Ltr. |
RECOMMENDED DFT | 15-20 microns per coat |
VOLUME SOLIDS % | Approximately 29% |
DRYING TIME | Dust free-4 hour |
OVER COATING INTERVAL | Min. Overnight |
FLASH POINT | Above 23C |
CURING | Apply 1st coat .Air dry for 24 hours. Alternatively heat cured at 200°c for 1 hours after 4 hours of air drying. Apply 2nd coat. Allow it to dry over night and then gradually raise the temperature to working temperature. |
WATER RESISTANCE | Exceilent |
SOLVENTS RESISTANCES | Good |
CHEMICAL RESISTANCE (ACIDS &ALKALIS) | FAIR |
DRY HEAT RESISTANCE | 400° C |
METHOD OF APPLICATION | Brush, conventional Spray |
DIRECTION FOR USE | Surface should be perfectly clean & dry, free rust, grease, oil, moisture and lose flakes before applying HT CLEAR400°C. |