Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
DESCRIPTION | A two pack self curing solvent based inorganic zinc silicate primer. It gives excellent cathodic protection to steel surface, preventing corrosion from extreme weathering condition. It is not recommended for strong acid or alkalies. |
RECOMMANDED USE | For application on Structural Steel, Pipelines, Storage Tank etc. subjected to aggressive environment. Suitable for application on columns, fertilizer plants, chemical units and various other industries including marine atmosphere. |
TYPE | Two pack, Self Cured .Ethyl silicate / Metallic Zinc |
MIXING RATIO | PART A : PART B - 35 : 65 BY WT. |
MATURATION TIME | 15-20 Minutes |
POT LIFE OF MIXTURE | 4 – 6 hrs |
FINISH | Matt |
COLOUR | Grey |
COVERING CAPACITY | 8-9 Sq.Mt/Ltr. |
RECOMMENDED DFT | 60 - 70 microns per coat |
VOLUME SOLIDS % | Approx. 56% |
DRYING TIME | Touch – 30 MINUTES Handle - 4-6 hrs .Hard – Overnight |
OVER COATING INTERVAL | Min. Overnight max . – Indefinite |
FLASH POINT | Above 23C |
RECOMMENDED THINNER | Spl. Thinner |
METHOD OF APPLICATION | Conventional Spray or airless Spray |
WEATHERABILITY | Very Good |
DIRECTION FOR USE | Surface should be clean, free rust, grease, oil, moisture and lose flakes. Stir the contents before use. Mix PART A and PART B properly in the recommend ratio. Allow mixture to mature for 15 minutes before applying by spray. Use necessary recommend thinner if required. |