WOOD COAT (Wood Primer)

PRODUCT COMPOSITION

REAL COAT SUPER smooth interier Paint is formulated with special grade emulsions, light fast pigment, unique additives like anit‐fungal, anti ‐ forming, anti‐ fading etc. In addition it has the unique "One way barrier" and as result the paint film enables it to breathe out moisture.

USP

High sheen, withstand extreme weather conditions, resist fungal growth, high protection against alkali. UV degradation and water resistance property because of the presence of Silicon. Upto 5 defreees cooler and infrared Ray block technology.

SURFACE PREPARATION AND PAINTING PROCEDURE

Select the correct surface for painting Sand the surface with sandpaper (80/100) throughly. Wash it with clean potable water by coir brush. Apply 1 or 2 of coats of Bio wash solution ( 5% v/v ) by brush. Allow it to dry overnight. Wash it again next day with potable water thoroughly. Allow the surface to dry fully. For better results apply 1 coat of illusion sealer (10% v/v ) followed by 1 or 2 coats of self primer (1:1) or 1/2 coasts of UMBRELLA COAT SUPER giving 4/5 hrs interval between the coasts. Dilute the top coat UMBRELLA COAT SUPER with portable water by 40% (v/v) and stran through clean cloth and apply 2 or 3 coats either by brush or felt roller giving minimum 4 hrs interval between the coats. The top coat can be applied by spray also. Maintain 40‐45 psi while spraying and keep 12"‐14" distance between the gun nozzle and the surface. For spraying it must be diluted to get 35" ‐ 40" viscocity by ford cup B4.

COVERAGE

ALL ON 1 COAT PRIMED SURFACE NEW SURFACE OLD SURFACE
By brush application 1 coat 9 ‐11 sqm 10.5 ‐12 sqm
  2 coats 5.5 - 6.5 sqm 6.5 ‐ 7 sqm
By roller application 1 coats 10 ‐ 11 sqm 11 ‐ 12 sqm
  2 coats 5.5 ‐ 6.5 sqm 6 ‐ 7 sqm
By spray application 1 coats 9 ‐ 10 sqm 9.5 ‐ 10.5 sqm
  2 coats 6.5 ‐ 7.5 sqm 7.5 ‐ 8 sqm
DRYING TIME SD 25 ‐35 minutes depending on weather conditions / HD 3‐4 hrs.
RECOMMENDED DILUTION 40% (v/v) depending on surface conditions.
GLOSS LEVEL 12‐15 AT 60 degree GH / 60‐65 at 85 deg. GH when released.
FLASH POINT NR
METHOD OF APPLICATION Brush, Roller, and Spray.
POT LIFE OF THINNED MATERIALS Over night
SHELF LIFE 3‐4 years from the date of manufacturing so long the container is sealed and kept is sealed and kept in normal temparature ( not in direct sun light or elevated temperature )

DIRECTIONS FOR APPLICATION

For better result apply 1 coat Illusion Sealer directly on the bare wall followed by 1 coat of Exterior Primer WITH 70% dilusion or self priming i.e. paint : water : 1:1 (v/v). After full drying apply 2 to 3 coats of UMBRELLA COAT SUPER by brush / roller. Allow mininum 4 hrs gap between the coats.

SR. NO. TEST SPECIFICATION
1 FINISH SMOOTH, UNIFOM, MATT
2 VISCOSITY 35 ---50 SEC (100GM SAM+50GMWAT)
3 WT/LTR 1.30—1.40 KGS /LTR
4 SETTLING SOFT & MIXABLE
5 PH 8 TO 10
6 DRYING TIME (a) SURFACE : 10MIN
(b) TAKE FREE : 1.00-2.00HRS
(c) HARD : 24.00HRS
7 FINISH SMOOTH, UNIFORM ,&MATT
8 COVERING /LTR 8 TO 10 Sqmeter /LIR
9 ADHESION PASSES

Quick Inquiry