WONDER COAT ‐ Exterior Acrylic Emulsion

PRODUCT COMPOSITION

WONDER COAT exterior emuksion paint is formulated with special grade emulsion suitable for dry and less humind climatic conditions. It includes suitable prgments, which gives excellent resistance to chalking along with special types of additives with anti‐fungal, anti‐fading, anti‐foarming properties. It is not an ideal product for excessive rainfall areas and coastal belt due to salinc weather conditions.

USP

Matt finish, emulsion finish as an alternative to waterproof cement paint at low cost. 3yrs life as againt 1 year life of cement paint.

SURFACE PREPARATION AND PAINTING PROCEDURE

Select the correct surface for painting. Sand the surface with sandpaper (80/100) thoroughly wash it with clean potable water by coir brush. Apply 1 to 2 coats of Bio wash solution ( 5% v/v ) by brush. Allow it to dry overnight. Wash it again next day with potable water throughly. Allow the surface to dry fully. For better results apply 1 coat of Illusion Sealer (10% v/v ) followed by 1 or 2 coats of self primer ( 1:1 ) or 1‐2 coats of WONDER COAT Exterior primer giving 4/5 hrs interval between the coats. Dilute the top coat walmaster with potable water by 60‐65% (v/v) and scrain through clean cloth and apply 2 or 3 coats either by brush or felt roller giving 4 hrs interval between the coats. The top coat can be applied by spray also. Maintain 40‐50 psi while spraying and keep 12" ‐ 14" distance between the fun nozzle and the surface. For spraying it must be diluted to get 65"‐75" viscosity by ford cup B‐4.

COVERAGE

ALL ON 1 COAT PRIMED SURFACE NEW SURFACE OLD SURFACE
By brush application 1 coat 9 ‐10 sqm 10 ‐ 12 sqm
  2 coats 4.5 - 5.5 sqm 5.5 ‐ 6 sqm
By roller application 1 coats 9 ‐ 10 sqm 10 ‐ 11 sqm
  2 coats 5 ‐ 6 sqm 7 ‐ 8 sqm
DRYING TIME SD 25 ‐35 minutes depending on weather conditions / HD 4‐6 hrs.
RECOMMENDED DILUTION 60‐65% (v/v) depending on surface conditions.
GLOSS LEVEL 1‐5 AT 60 degree GH on glass plate when released at 300 micron dft applied box coater.
FLASH POINT 100% water base paint. Hence NR.
METHOD OF APPLICATION Brush, Roller, and Spray.
POT LIFE OF THINNED MATERIALS 24 hrs after dilution.
SHELF LIFE 3‐4 years from the date of manufacturing so long the container is sealed and kept is sealed and kept in normal temparature ( not in direct sun light or elevated temperature ).
RECOMMENDED SURFACE Sand / Cement plaster surface, asbestos, brickwork, concrete block, fiberboard etc.

DIRECTIONS FOR APPLICATION

For better result apply 1 coat Illusion Sealer directly on the bare wall or apply 1 coat of Exterior Primer WITH 70% dilusion or self priming i.e. paint : water : 1:1 (v/v). After full drying apply 2 to 3 coats of UMBRELLA COAT SUPER by brush / roller. Allow mininum 4‐6 hrs gap between the coats.

SR. NO. TEST SPECIFICATION
1 FINISH SMOOTH, UNIFOM, MATT
2 VISCOSITY 15-30 SEC (100GM SAM+50GMWAT)
3 WT/LTR 1.40—1.50 KGS /LTR
4 SETTLING SOFT & MIXABLE
5 PH 8 TO 10
6 DRYING TIME (a) SURFACE : 10MIN
(b) TAKE FREE : 1.00-2.00HRS
(c) HARD : 24.00HRS
7 FINISH SMOOTH, UNIFORM ,&MATT
8 COVERING /LTR 8 TO 12 Sqmeter /LIR
9 ADHESION PASSES

Quick Inquiry