Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
GUNJCRYL – 7650 is a water based dispersion / emulsion of acrylic styrene co- polymer. It is a surfactant stabilized colloid free emulsion. It gives hard, tough, flexible and glossy film, excellent wet scrub and abrasion, excellent pigment loading characteristics and alkali resistance.
Properties |
||
Physical Appearance | Bluish Translucent Emulsion | |
Solis Content % | 50+/-1 | |
Viscosity at 30 °C | 25,000 - 40,000 CPs | |
pH | 8 – 10 | |
MFFT | 18 °C (approx.) | |
Glass Transition | 23 °C (approx.) | |
Mean Particle size | 0.12μ | |
Free Monomer | <0.3% | |
Film Characteristics | Hard, Tough, Clear, Flexible and Abresion Excellent & Wet Scrub & abrasion, Excellent pigment loading characteristics, alkali resistance. |
GUNJCRYL – 7650 can be used for producing semi gloss to matt finish emulsion paint, for application of Masonry, concrete, wood and other interior and exterior architectural Structure.
GUNJCRYL – 7650 being hard and tough breathable polymer with very good exterior durability, it is well suited for exterior texture paint. It has very good binding capacity to hold texture aggregates. It has special surfactant system and its capability to form tight film enables it to resist substrate efflorescence effectively. Texture film based on
GUNJCRYL – 7650 do not hold on to dirt and hence keeps film clean. It is highly water resistance, combined with excellent UV resistance that gives it good exterior weather ability properties. GUNJCRYL – 7650 can also be used as a binder for Non-woven fabrics. It can be applied by dipping, roller or by spraying.
Store in sealed containers in dry condition at temperature between 15 – 30 °C, away from direct heat, sunlight, dust and moisture. Protect from ice. Containers once opened should be shut tightly to prevent contamination. Stocks should be used on a first in, first out basis. Don’t mix with other products without consulting us / doing your own test to determine it’s suitabilily, as it can lead to incompatibility and other related problems.
220 kg plastic drum, 50 kg plastic drum.
NOTE: We recommend that before using our products in full scale production, the customer
should make his own tests to determine the suitability of the products for his own purpose under his operating conditions. As circumstances under which our products are stored, handled and used are beyond our control, we cannot assume any responsibility for their use by the customer. Information given here is subject to change or can be withdrawn without notice. For more details contact us.