Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
GUNJLITE SYNTHIC ENAMEL PAINTS |
|
| Specification | |
| DESCRIPTION | A premioum quality glossy enamel based on syn.resin vehicle & stable weather resitant pigments,designed for both protection & decoration ,intermally & externally.This is an ideal finishinng paints for new & old work on wood,metal ,brick,cement,plasted concreat,fiberboard etc. |
| RECOMMANDED USE | As a finishing coat for exterior of wooden or steel surfaces exposed in mild to moderate corrosive environment.. |
| TYPE | Singel Pack Air Drying |
| FINISH | Glossy / semi glossy/ matt |
| COLOUR | Any assorted shade |
| COVERING CAPACITY | 10-12 Sq. Mt./ Ltr. per coat at 35 micron DFT |
| RECOMMENDED DFT | 30 - 35 Microns per coat |
| VOLUME SOLIDS | Approx. 34% |
| DRYING TIME | Touch : 30mint., Handle : 6-8 hrs. Hard : Overnight |
| OVER COATING INTERVAL | Min. 8 hours. Max – indefinite |
| FLASH POINT | Above 200C |
| RECOMMENDED THINNER | G p thinner |
| METHOD OF APPLICATION | Brush, roller, or airless Spray |
| DIRECTION FOR USE | Surface should be clean, for free rust, grease, oil, moisture and lose flakes. Sand blast mild steel substrate. Stir the contents before use. All Use if necessary recommended thinner. Primer surface should not be exposed to corrosive environment for a long time without application of finishing paints. |
Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
