Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
TRUE COAT ‐ Acrylic Washable Distemper is 100% water based acrylic co polymer emulsion based distemper for interior walls only. It is best known for low cost, elegent, smooth, attractive, durable with matt finish. It is eco‐ friendly and contains no added lead, arsenic etc. besides having low VOC content.
Colour range, value for money.
| ALL ON 1 COAT PRIMED SURFACE | NEW SURFACE | OLD SURFACE | |
| By brush application | 1 coat | 17 ‐18 sqm | 17 ‐19 sqm |
| 2 coats | 8 ‐ 10 sqm | 8 ‐ 11 sqm |
| DRYING TIME | SD 15 ‐25 minutes depending on weather conditions / HD 3‐4 hrs. |
| RECOMMENDED DILUTION | 60‐65% (v/v) on 1st coat depending on surface conditions. 50% (v/w) on 2nd coat. |
| GLOSS LEVEL | Matt Finish |
| FLASH POINT | 100% water base paint. Hence NR. |
| METHOD OF APPLICATION | Brush, Roller |
| POT LIFE OF THINNED MATERIALS | Over Night |
| SHELF LIFE | 3‐4 years from the date of manufacturing so long the container is sealed and kept is sealed and kept in normal temparature ( not in direct sun light or elevated temperature ). |
| RECOMMENDED SURFACE | Sand / Cement plaster surface, asbestos, brickwork, concrete block, fiberboard etc. |
| NO OF COATS APPLICATION | Apply 2 coats True Coat Acrylic distemper for re‐painting provided the colour is same. For new painting it is advisable to give 3 coats to get a smooth, matt finish. |
| Packing | Packed in 1 ltr. 4 ltrs, 20 ltrs. |
Ensure the pH value below 11 and moisture content below 12% positively. Sand the surface with Sand paper No. 80/100. Make it dust & loose particles free. To get fungus free surface apply 1 coat Bio Wash by brush. Keep it overnigh and wash it again with fresh portable water. Allow it to dry fully. For better result apply 1 coat sealer followed by 1 coat. After that apply WALL PLAST ( WALL PUTTY ) 2 coats for a smooth and undulation free surface. Sand the surface to make even smoother by water paper No. 280/320 and make the surface dust free. Apply 1 more coat of WONDER COAT and cut it with water paper No. 80/400 lightly. Wipe the surface clean. Dilute the paint and strain through clean cloth and apply 2‐3 coats giving 6 hrs interval between the coats.
| SR. NO. | TEST | SPECIFICATION |
| 1 | FINISH | SMOOTH, UNIFOM, MATT |
| 2 | VISCOSITY | 15-30 SEC (100GM SAM+50GMWAT) |
| 3 | WT/LTR | 1.47—1.57 KGS /LTR |
| 4 | SETTLING | SOFT & MIXABLE |
| 5 | PH | 8 TO 10 |
| 6 | DRYING TIME | (a) SURFACE : 10MIN (b) TAKE FREE : 1.00-2.00HRS (c) HARD : 24.00HRS |
| 7 | FINISH | SMOOTH, UNIFORM ,&MATT |
| 8 | COVERING /LTR | 8 TO 12 Sqmeter /LIR |
| 9 | ADHESION | PASSES |
Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
