Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
TECHNICAL DATA SHEET |
|
| Specification | |
| DESCRIPTION | A Synthic Enamel finish using selective pigments for protection of WOODl structures. |
| RECOMMANDED USE | This coating is ideal for application on steel ,m s ,&galvanizing. |
| TYPE | Singel Pack Air Drying |
| FINISH | matt |
| COLOUR | Grey shade |
| COVERING CAPACITY (THEORATICALLY) |
7-8 Sq. Mt./ Ltr. per coat at 35 micron DFT |
| RECOMMENDED DFT | 30 - 35 Microns per coat |
| DRYING TIME | Touch : 45 mint., Handle : 4-5 hrs. Hard : Overnight |
| OVER COATING INTERVAL | Min. 8 hours. Max – indefinite |
| FLASH POINT | Above 200C |
| RECOMMENDED THINNER | G P Thinner |
| METHOD OF APPLICATION | Brush, roller, or airless Spray |
| DIRECTION FOR USE | Surface should be clean, for free rust, grease, oil, moisture and lose flakes. Sand blast mild steel substrate. Stir the contents before use. All Use if necessary recommended thinner. Primer surface should not be exposed to corrosive environment for a long time without application of finishing paints. |
Copyright © 2016 | Gunjan Paints Limited, All rights reserved.
